CyberData 011097 Specifications download pdf (Page 21)

Installing the VoIP V2 Loudspeaker Amplifier

Loudspeaker Amplifier Setup

Operations Guide 930362E CyberData Corporation

2.2.6 Confirm Operation

After connecting the Loudspeaker Amplifier to the ethernet hub, use the LEDs on the Loudspeaker

Amplifier face to confirm that the Loudspeaker Amplifier is operational and linked to the network.

Figure 2-14. Loudspeaker Amplifier LEDs—Power and Link

Figure 2-15. Loudspeaker Amplifier LEDs—Status and Activity

Table 2-7. Loudspeaker Amplifier LEDs

LED Color Function

Power Blue/Green The power LED is illuminated a steady green when the power is on and in

low power mode. The power LED is illuminated a steady blue when the

amplifier is in high power mode. The power LED will blink during a boot up or

a phone call.

Status Green After supplying power to the Loudspeaker Amplifier, a steady LED confirms

that the Loudspeaker Amplifier is operational. The status LED will blink

during a page when it is online.

Link Green/Ye ll ow The Link LED is illuminated green for a 10Mb link or yellow/green for a

100Mb link when the network link to the Loudspeaker Amplifier is

established.

Activity Green The Activity LED blinks to indicate network traffic.

Power LED (blue/green)

Link LED (green/yellow)

Status LED (green)

Activity LED

(green)(yellow)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 72 73

No comments

CyberData 011097 Specifications Page 21