CyberData 011097 Specifications download pdf (Page 14)

Installing the VoIP V2 Loudspeaker Amplifier

Loudspeaker Amplifier Setup

Operations Guide 930362E CyberData Corporation

2.2.1 Loudspeaker Amplifier Components

Figure 2-3 shows the components of the Loudspeaker Amplifier .

Figure 2-3. Loudspeaker Amplifier Components

DIP Switches

Speaker Volume

Network Link LED (GREEN/YELLOW)

Status LED (GREEN)

A steady LED confirms that the Loudspeaker Amplifier is oper-

ational. The LED will blink during a page when it is online.

Network Activity LED (GREEN)

Power LED (GREEN/BLUE)

The power LED is a steady green in low power mode and

a steady blue during high power mode. The power LED

will only blink either during a boot up or a phone call.

RTFM Switch

To broadcast a Loudspeaker Amplifier’s current IP

address, press and hold the RTFM switch for a couple of

seconds and then release it.

To restore the factory defaults, complete the following

steps:

1. Press and hold the RTFM switch until you hear the

Loudspeaker Amplifier announce the words, “restoring

defaults” and “rebooting”.

2. Release the RTFM switch. The Loudspeaker Amplifier

will be restored to the factory default settings.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 72 73

No comments

CyberData 011097 Specifications Page 14