CyberData VoIP Ceiling Speaker User Manual download pdf (Page 14)

CyberData Corporation 930095H Operations Guide

Installing the VoIP Ceiling Speaker

Speaker Setup

2.2.3 Confirm the IP Address, Test the Audio, and Check the Volume

When the speaker is operational and linked to the network, use the Reset Test Function

Management (RTFM) switch (

Figure 2-4) on the speaker face to announce and confirm the speaker’s

IP Address, test that the audio is working, and check the volume.

Figure 2-4. RTFM Switch

To announce a speaker’s current IP address:

1. Press and hold the RTFM switch until it beeps (after one second).

2. Release the switch to hear the IP address announcement, and check the speaker volume.

Note The speaker will announce it's default IP address (192.168.3.10).

CAUTION Pressing and holding the RTFM switch for longer than 20 seconds will restore the

speaker to the factory default settings. See

Section 2.6, "Restore the Factory Default Settings".

RTFM switch

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 41 42

No comments

CyberData VoIP Ceiling Speaker User Manual Page 14