CyberData VoIP Ceiling Speaker User Manual download pdf (Page 13)

Installing the VoIP Ceiling Speaker

Speaker Setup

Operations Guide 930095H CyberData Corporation

2.2.2 Confirm that the Speaker is Operational and Linked to the Network

After connecting the speaker to the 802.3af compliant ethernet hub, the LEDs on the speaker face

confirm that the speaker is operational and linked to the network.

Figure 2-3. Status and Activity LEDs

2.2.2.1 Status LED

After supplying power to the speaker:

1. The green Status LED illuminates after approximately five seconds to indicate the start of the

firmware verification and load process.

2. After approximately 15 seconds, the Status LED begins to blink at one second intervals to

indicate the start of the firmware boot process.

3. After approximately 35 seconds, the speaker beeps once to indicate that it is operational.

4. The Status LED will continue to blink at one second intervals to indicate normal operation.

2.2.2.2 Link LED

● The Link LED is illuminated when the network link to the speaker is established.

● The Link LED blinks to indicate network traffic.

Speaker

Status

(Green)

Network

Link/Activity

(Yellow)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

No comments

CyberData VoIP Ceiling Speaker User Manual Page 13