CyberData 010935 Specifications download pdf (Page 57)

Operations Guide 930242G CyberData Corporation

Appendix B: Setting up a TFTP Server

B.1 Set up a TFTP Server

Upgrading the VoIP Intercom firmware requires a TFTP server on which you access the Web

interface where you can upload the firmware files.

B.1.1 In a LINUX Environment

To set up a TFTP server on LINUX:

1. Create a directory dedicated to the TFTP server, and move the files to be uploaded to that

directory.

2. Run the following command where /tftpboot/ is the path to the directory you created in

Step 1: the directory that contains the files to be uploaded. For example:

in.tftpd -l -s /tftpboot/your_directory_name

B.1.2 In a Windows Environment

You can find several options online for setting up a Windows TFTP server. This example explains

how to use the Solarwinds freeware TFTP server, which you can download from the VoIP Intercom

product page at:

http://www.cyberdata.net/support/voip/index.html

To set up a TFTP server on Windows:

1. Install and start the software.

2. Select File/Configure/Security tab/Transmit Only.

3. Make a note of the default directory name, and then move the firmware files to be uploaded to

that directory.

B.1.3 In a Solarwinds Server Environment

You can find several options online for setting up a Solarwinds server. This example explains how to

use the Solarwinds freeware TFTP server, which you can download from the VoIP Intercom product

page at:

http://www.cyberdata.net/support/voip/index.html

1 2 ... 52 53 54 55 56 57 58 59 60 61 62

No comments

CyberData 010935 Specifications Page 57