CyberData 011186 Specifications download pdf (Page 40)

Installing the VoIP V3 Intercom

Configure the Nightringer Parameters

Operations Guide 930472A CyberData Corporation

2. On the Nightringer Configuration page, enter values for the parameters indicated

in Table 2-12.

3. After changing the parameters, click on the Save button.

Table 2-12. Nightringer Configuration Parameters

Web Page Item Description

Enable Nightringer When the nightringer is enabled, the unit will attempt to

made to this extension will play a ringtone.

Nightringer Settings

SIP Server Type the SIP server represented as either a numeric IP

address in dotted decimal notation.

Remote SIP Port Type the Remote SIP Port number (default 5060)

(8 character limit).

Local SIP Port Type the Local SIP Port number (default 5060)

(8 character limit).

Note: This value cannot be the same as the Local SIP Port*

found on the SIP Configuration Page.

User ID Type the User ID (up to 64 alphanumeric characters).

Authenticate ID Ty p e the Authenticate ID (up to 64 alphanumeric

characters).

Authenticate Password Type the Authenticate Password (up to 64 alphanumeric

characters).

Re-registration Interval (in seconds) Type the SIP Registration lease time in minutes (default is

60 minutes) (8 character limit). Re-registration Interval (in

seconds)*

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 87 88

No comments

CyberData 011186 Specifications Page 40