CyberData 021037C Specifications Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 86
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Operations Guide 930274R CyberData Corporation
30
2. On the SIP Configuration page, you may enter values for the parameters indicated in Table 2-
8.
Table 2-8. SIP Configuration Parameters
Web Page Item Description
Enable SIP Operation Enables or disables SIP operation.
SIP Settings
SIP Server Use this field to set the address (in dotted decimal notation or as
a canonical name) of the SIP registrar. This field can accept
canonical names of up to 255 characters in length.
Backup SIP Server 1
Backup SIP Server 2
When the primary SIP Server goes offline and the device fails to
register after the normal re-registration interval, the controller
will fall back to using Backup SIP Server 1.
If Backup SIP Server 1 fails, the device will use Backup SIP
Server 2.
If a higher priority SIP Server comes back online, the device will
switch back to this server.
You can leave the Backup SIP Server 1 and Backup SIP
Server 2 fields blank.
SIP Server Use this field to set the address (in dotted decimal notation or as
a canonical name) of the SIP registrar. This field can accept
canonical names of up to 255 characters in length.
Remote SIP Port* Type the Remote SIP Port number (default 5060)
(8 character limit).
Local SIP Port* Type the Local SIP Port number (default 5060)
(8 character limit).
Outbound Proxy Type the Outbound Proxy as either a numeric IP address in
dotted decimal notation or the fully qualified host name
(255 character limit [FQDN]).
Outbound Proxy Port Type the Outbound Proxy Port number (8 character limit).
SIP User ID* Type the SIP User ID (up to 64 alphanumeric characters).
Authenticate ID* Type the Authenticate ID
(up to 64 alphanumeric characters).
Authenticate Password* Type the Authenticate Password (up to 64 alphanumeric
characters).
Register with a SIP Server* Enable or disable SIP Registration.
Re-registration Interval (in seconds)* Type the SIP Registration lease time in minutes (default is 60
minutes) (8 character limit). Re-registration Interval (in
seconds)*
Unregister on Reboot* When selected, on boot, the speaker will first register with a SIP
server with a expiration delay of 0 seconds. This has the effect
of unregistering any current devices on this extension.
Buffer SIP Calls When this is enabled, SIP calls to the speaker will be stored in
memory and will play when either the call is terminated or the
buffer is full. The receive buffer is 2MB in size and this is equal
to about four minutes of ulaw encoded audio.
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 85 86

Comments to this Manuals

No comments